Encoder Signal Cable Compatible with Haozhi DGZX-12042/11.0-HSK Spindle
Encoder Signal Cable Compatible with Haozhi DGZX-12042/11.0-HSK Spindle
Please contact customer service for a quotation before ordering.
Please contact customer service to confirm price, delivery time, encoder type, interface, pin definition and adaptability before ordering.
Compatible Encoder Signal Cable
This is a third-party replacement encoder feedback / signal cable designed for use with Haozhi DGZX-12042/11.0-HSK spindle systems. It is not manufactured or endorsed by Haozhi. The connector type, pin assignment, shielding, cable material and finished length are produced according to the customer's confirmed machine configuration.
Key Features
- Flexible signal cable construction suitable for moving industrial equipment.
- Shielded cable options designed to reduce electromagnetic interference.
- PVC or PUR jacket options for different installation environments.
- Custom connector configuration and finished cable length available.
- Continuity and pin-to-pin electrical testing available before shipment.
Drag Chain Installation
For drag-chain use, please provide the required bending radius, travel speed, cycle frequency and installation environment so that a suitable continuous-flex cable can be selected.
Information Required Before Ordering
- Exact spindle, encoder and machine model.
- Clear photographs of both connectors and their keying.
- Original wiring diagram or confirmed pin assignment.
- Required finished cable length.
- Drag-chain movement and environmental requirements.
Compatible Equipment Reference Specifications
The table below describes the referenced Haozhi equipment model and is provided only to help confirm compatibility; it is not the cable specification.
| Diameter | φ120mm |
|---|---|
| Tool Holder Model | HSK E40 |
| Bearing Type | Ceramic Ball Bearings |
| Motor Type | Asynchronous |
| (High / Low Speed Winding) Max. Speed | 42,000rpm / 15,000rpm |
| (High / Low Speed Winding) Max. Frequency | 1400Hz / 500Hz |
| (High / Low Speed Winding) Rated Voltage | 380V / 220V |
| (High / Low Speed Winding) Output Power S1 100% | 11.0kW / 6.0kW |
| (High / Low Speed Winding) Output Power S6 40% | 16.5kW / 9.0kW |
| (High / Low Speed Winding) Output Torque S1 100% | 3.3N·m / 7.3N·m |
| (High / Low Speed Winding) Output Torque S6 40% | 5.0N·m / 10.9N·m |
| (High / Low Speed Winding) Rated Current S1 100% | 23.5A |
| (High / Low Speed Winding) Rated Current S6 40% | 35.3A |
| Air Seal Air Flow | 60±20L/min (Air pressure 0.15MPa) |
| Cooling Method | Water Cooling (Recommended) |
| Cooling Flow | 4~6L/min (Water pressure 0.25MPa) |
| Motor Temperature Sensor Type | KTY84-130 |
| Bearing Lubrication Type | Oil-Air |
| Tool Change Method | Cylinder |
Compatible model: Haozhi DGZX-12042/11.0-HSK
Reference series: Carving and Milling Electric Spindle Series
Model reference source: Haozhi official product page
Confirm compatibility before ordering
Share the original part number, machine model, connector photo, required length or wiring drawing. Our team will help verify the right configuration.
We compare model numbers, connector type, pin count and application requirements.
Length, cable jacket, shielding, pinout and connector options can be made to specification.
International shipping is available for replacement cables, connectors and custom harnesses.